Latest update

6/recent/ticker-posts

Install Harvester in VMware ESXi

I have been playing around with Harvester by Rancher which is a pretty cool project that combines Kubernetes with Virtual Machines. For those that want to play around with Harvester and may not have a physical workstation to play around with, but you have your VMware ESXi lab, you can install Harvester inside of VMware ESXi as a nested hypervisor with nested virtualization enabled. It is pretty easy and I will walk you through the steps to get this done. Let’s look at installing harvester in VMware ESXi and see how you can setup a Harvester lab.

What is Harvester?

I just finished writing a pretty detailed blog post covering what Harvester is exactly.

However, in brief, it is an open-source solution from Rancher that provides an HCI solution that combines the capabilities of running virtual machines and containers in the same platform. As you can imagine, since it is made by Rancher, you can integrate the solution in Rancher to have a cohesive platform to run VMs and containers. So, it is a pretty cool solution.

Install Harvester in VMware ESXi

The process to install Harvester in VMware ESXi is fairly straightforward and aligns with installing any other nested hypervisor installation inside an ESXi virtual machine. You need to enable a couple of things to make sure nested virtualization works with an ESXi VM, including:

  • Expose hardware assisted virtualization to the guest OS
  • Change security settings for your vSphere Standard or vSphere Distributed Switch

Below, you can see the details of the CPU settings I have configured for the Harvester ESXi VM. Place a check next to the Expose hardware assisted virtualization to the guest OS.

Expose hardware assisted virtualization to the guest OS
Expose hardware assisted virtualization to the guest OS

 

Below is an example of how you can change the security permissions for your nested virtualization VM. Under the Security option for the vSwitch, you can change the settings for promiscuous mode, MAC address changes, and Forged transmits to Accept.

Edit the security settings for the vSphere standard or vSphere Distributed Switch
Edit the security settings for the vSphere standard or vSphere Distributed Switch

Once you have the virtual machine configured, you will need to have the Harvester ISO mounted to the CD ROM drive in the ESXi VM as well. You can download the Harvester ISO from here:

Boot the VM from the Harvester installation ISO, and begin the installation.

Starting the installation of Harvester in an VMware ESXi virtual machine
Starting the installation of Harvester in an VMware ESXi virtual machine

Here we choose to Create a new Harvester cluster. Even though, like me, you may just be installing a single node, it allows establishing the virtual IP address (VIP) and other configurations needed to expand the cluster in the future.

Create a new Harvester Cluster
Create a new Harvester Cluster

 

On the installation target, you will be able to select the disk you want to install Harvester on and the partitioning scheme.

Choose the installation target
Choose the installation target

I wanted to post a screenshot on this. When I was grabbing the screens for the installation, I had only configured the VM with an 80 gig disk. After seeing this error, I went ahead and installed the node. However, when trying to configure a VM, I ran into storage issues. So, I reconfigured it with a 200 GB thin provisioned disk to give more headroom. Just beware of these requirements.

Error about disk size in Harvester
Error about disk size in Harvester

Set the hostname, Management NIC, Bond Mode, and IPv4 method.

Setting management NIC bond mode and IPv4 configuration
Setting management NIC bond mode and IPv4 configuration

Configure the DNS servers you want to use.

Configure DNS servers for the Harvester installation
Configure DNS servers for the Harvester installation

 

Configure the virtual IP address (VIP). This is the IP address that will be assumed by the Harvester cluster.

Configure the virtual IP address for the Harvester cluster
Configure the virtual IP address for the Harvester cluster

Next, you will be asked to configure a cluster token. This is the password that allows joining additional Harvester nodes to the Harvester cluster.

Configure your cluster token for Harvester
Configure your cluster token for Harvester

Configure your password to access the Harvester node.

Configure the password for the Harvester node
Configure the password for the Harvester node

 

Configure NTP. Below is the default NTP server that Harvester configures. You can change this here if needed.

Configure NTP settings for Harvester
Configure NTP settings for Harvester

Set the optional proxy configuration if needed.

Set a proxy address if needed
Set a proxy address if needed

 

Import SSH keys if needed.

Import SSH keys for your Harvester node
Import SSH keys for your Harvester node

Set the remote Harvester config if you have a config you want to use that is accessible via HTTP.

Remote Harvester configuration from HTTP
Remote Harvester configuration from HTTP

Finally, confirm your installation options. Select Yes to begin the Harvester installation.

Confirm the installation options of Harvester in VMware ESXi
Confirm the installation options of Harvester in VMware ESXi

 

The installation of Harvester begins.

Harvester installation begins after confirming the installation options
Harvester installation begins after confirming the installation options

Once the Harvester installation completes, you will see the Current status change to Ready. As a note, my node took a couple of minutes to change to the Ready state.

Harvester node is installed and in a Ready state
Harvester node is installed and in a Ready state

 

Accessing the Harvester admin page

Now that we have the Harvester node in the ready state, we should be able to access the management URL by browsing the VIP of the Harvester cluster. This page looks identical to the Rancher initial configuration. It will suggest a randomly generated password to use, or you can manually set a specific password to use.

Setting your Harvester admin password 1
Setting your Harvester admin password 1

Now that we have access to the Harvester admin interface, navigate to Images. To install a virtual machine, we need to have an image to install from. Here, we can select URL and provide a download URL, such as for the latest Ubuntu 22.04 Server.

Uploading an Ubuntu image for installing Ubuntu 22.04 Server
Uploading an Ubuntu image for installing Ubuntu 22.04 Server

The download of Ubuntu 22.04 ISO image begins.

The Ubuntu 22.04 Server ISO begins downloading
The Ubuntu 22.04 Server ISO begins downloading

 

Once the image finishes downloading, navigate to Virtual Machines and select Create.

Beginning to create a new virtual machine in Harvester
Beginning to create a new virtual machine in Harvester

On the Basics page, name the virtual machine and set the CPU and memory configuration.

Set the CPU and memory configuration
Set the CPU and memory configuration

On the Volumes configuration, for the first volume, change the type to cd-rom and select the image you downloaded under Image. Add an additional volume to serve as the hard disk for the VM. Here I am selecting the defaults for the most part. I have set the size to a meager 15 gigs just for testing purposes. I left the Bus configured for VirtIO.

Configure the storage for the VM including the ISO image
Configure the storage for the VM including the ISO image

 

Under Networks, you can configure the networking for the Ubuntu virtual machine. Here I have selected Management Network to share the management network and set the type to Bridge. Model is virtio.

Configure your network options
Configure your network options

I didn’t change anything here, but if you have multiple Harvester nodes, these options are interesting. It affects how VMs live migrate or are pinned to specific hosts.

Viewing the node scheduling options for a Harvester VM
Viewing the node scheduling options for a Harvester VM

 

I also did not change anything in the advanced options screen, but again, lots of interesting options, including Cloud Config. When you are ready to create the VM, click Create.

Viewing advanced options for the Harvester VM
Viewing advanced options for the Harvester VM

The VM starts automatically and you should see it enter the Running state.

The virtual machine immediately starts running
The virtual machine immediately starts running

If you have issues or see your VM get stuck starting, you can navigate to the Detail > Events screen, which shows the log entries. If you have any issues, they will be listed here.

Viewing events for the Harvester virtual machine
Viewing events for the Harvester virtual machine

 

To open a console connection to your VM, go back to the Virtual Machines screen and click the arrow next to Console. You have a couple of choices here, but I am selecting Open in Web VNC.

Opening the virtual machine console in Harvester
Opening the virtual machine console in Harvester

The web VNC window opens, and you now have console access to your Ubuntu VM. Cool stuff.

Ubuntu Server installation begins as it boots from the ISO image
Ubuntu Server installation begins as it boots from the ISO image

 

Wrapping Up

As shown, the process to Install Harvester in VMware ESXi is pretty straightforward. This is an interesting solution that I would like to play around with more. I think solutions like Harvester have a long way to go before offering the enterprise features and capabilities businesses are used to with a mature, robust hypervisor like ESXi. However, for organizations already using Rancher and who want to stick with open source solutions for running virtual machines, Harvester has a lot of potential with seamless integration to their cloud-native stack.

Post a Comment

0 Comments